Introducing the CardiAct 200 Series

AED wall cabinet suitable for storing any brand of AED.

ALARM:

Removing the AED from the cabinet will immediately trigger a

visual alarm with flashing red LED's as well as an audible alarm (90 dB).

 

TEMPERATURE CONTROL SYSTEM:

Temperature control allows the AED unit to be maintained at above freezing temperatures and protected in extreme conditions, down to -20 °C and following the AED manufacturer's specification for safe storage.

 

COMMUNICATION MODULE:

Optional Voice communications via the cabinet, allowing the responder to communicate any chosen call centre or telephone vocally.

 

SUITABLE FOR:

Indoor and outdoor use

MONITORING:

Non-monitored

 

ACCESS TYPE:

Open or restricted access - the 230 Series model is a public or limited access outdoor cabinet and secured by a four-digit code. The code can be known or provided during an emergency by the base monitoring centre via the integrated hands-free emergency phone.

 

The 200 Series allows the cabinet located in a real public access location where onsite security/ supervision may not be available.

 

COMPATIBLE WITH:

All leading brand AEDs

DIMENSIONS:

338 mm (W) x 423 mm (H) x 201 mm (D)

WEIGHT:

3.5 kg

 

FABRICATION:

Impact-resistant rust-free transparent polycarbonate cover and green ABS base

 

INSTALLATION:

• Power supply installation by a licensed electrician.

• 3 x 8 mm wall holes

 

DAY / NIGHT LIGHTING:

• Automatic day/night lighting - integrated light sensor to light up the AED compartment in dark conditions

• Flashing white LED in low ambient light conditions to help identify the location of the AED Emergency Cabinet

 

SUITABLE FOR:

Indoor and outdoor use

 

MONITORING:

Non-monitored ACCESS TYPE:

Open or restricted access - the 230 Series model is a public or limited access outdoor cabinet and secured by a four-digit code. The code can be known or provided during an emergency by the base monitoring centre via the integrated hands-free emergency phone. The 200 Series allows the cabinet located in a real public access location where onsite security/ supervision may not be available.

 

COMPATIBLE WITH:

All leading brand AEDs

 

DIMENSIONS:

338 mm (W) x 423 mm (H) x 201 mm (D)

 

WEIGHT:

3.5 kg

 

FABRICATION:

Impact-resistant rust-free transparent polycarbonate cover and green ABS base

 

INSTALLATION:

• Power supply installation by a licensed electrician.

• 3 x 8 mm wall holes

 

DAY / NIGHT LIGHTING:

• Automatic day/night lighting - integrated light sensor to light up the AED compartment in dark conditions

• Flashing white LED in low ambient light conditions to help identify the location of the AED Emergency Cabinet

 

Power Supply

24 Volt DC low voltage The power supply is safe and allows the operation of the

heating and fan systems. With this specificity as well as its intelligent design, the 230 Series is suitable for outdoor positioning.

 

BACK-UP BATTERY POWER:

Rechargeable back-up battery (approx 4 hours) for

essential functions in case of power supply failure.

 

TEMPERATURE CONTROL SYSTEM:

Temperature control allows the AED unit to be maintained at above freezing temperatures and protected in extreme conditions, down to -20°C and following the AED manufacturer's specification for safe storage.

A thermostatically controlled fan system is activated through a temperature sensor and configured thresholds. The fan system enables the heat to be

extracted from the AED compartment when during increased temperature and warmer environments. A visual alarm signals anomalies such as out of range

temperatures using flashing red LEDs. Cabinet heating will also activate in cold climates.

 

ELECTRONIC KEYPAD:

Secure emergency and maintenance access via a 4-digit code. The code can be known or given to the responder through the cabinets' integrated hands-free phone.

 

COMMUNICATION:

• Integrated 4G cellular technology (SIM) allowing voice communication: 24 Volt DC low voltage The power supply is safe and allows the operation of the

heating and fan systems. With this specificity as well as its intelligent design, the 230 Series is suitable for outdoor positioning.

 

BACK-UP BATTERY POWER:

Rechargeable back-up battery (approx 4 hours) for essential functions in case of power supply failure.

 

TEMPERATURE CONTROL SYSTEM:

Temperature control allows the AED unit to be maintained at above freezing temperatures and protected in extreme conditions, down to -20°C and following the AED manufacturer's specification for safe storage.

A thermostatically controlled fan system is activated through a temperature sensor and configured thresholds. The fan system enables the heat to be

extracted from the AED compartment when during increased temperature and warmer environments. A visual alarm signals anomalies such as out of range temperatures using flashing red LED's. Cabinet heating will also activate in cold climates.

 

ELECTRONIC KEYPAD:

Secure emergency and maintenance access via a

4-digit code. The code can be known or given to the responder through the cabinets' integrated hands-free phone.

 

COMMUNICATION:

• Integrated 4G cellular technology (SIM) allowing voice communication

PRICING: 

It's hard to give accurate pricing as this is a very much a mix and match system and can fitted with an option. As these's aren't off the shelf products and have fitted out, there is a six week lead time for deployment 

MORE INFORMATION

If you require further information, please contact us either on 0474 976 401 or glenn@gpmtraining.com.au

Leave a comment

Please note, comments must be approved before they are published